The solution to the short circuit of the brushless motor
The short circuit of the brushless motor refers to the phenomenon that the voltage between the windings of the motor drops below the specified value, resulting in a series of problems, such as overheat, poor dynamic performance and noise, etc. The causes of the short circuit of the brushless motor are various, including damage to the insulation layer, incorrect installation or maintenance, etc.
The following are some solutions to the short circuit of the brushless motor:
1. Check the insulation layer: if there is damage to the insulation layer, it should be repaired or replaced.
2. Check the connection: if there is a poor connection between the windings or between the windings and the controller, it should be found out and corrected.
3. Check the moisture: if there is moisture or water around the motor, it should be wiped or drained.
4. Check the operation: if the motor is operated in a wrong way or used in an improper environment, it should be adjusted or protected.
5. Check the maintenance: if maintenance has been carried out on the motor, it should be checked whether it meets the requirements.
6. Check the controller: if there is a problem with the controller, it should be checked and repaired or replaced.
In short, it needs to find out and solve the cause of the short circuit of the brushless motor through multi-angle detection and analysis, so as to ensure normal operation of the motor.
Electricmotor